Simpson Strong Tie Stainless Steel Titen HD® Heavy Duty Screw Anchors
Simpson Strong-Tie® Stainless Steel Anchoring Systems | ||
Simpson Strong-Tie® Stainless Steel Titen HD® Heavy Duty Screw Anchors in Type 316 Stainless Steel | ||
Drill a hole in the base material using a carbide drill bit with the same diameter as the nominal diameter of the anchor to be installed. Drill the hole to the specified minimum hole depth overdrill (1/2") to allow the thread tapping dust to settle. (If using the 3/8" diameter Titen the minimum hole depth is ¼")
Insert the anchor through the fixture and into the hole.
The Simpson Titen HD Heavy Duty Screw Anchors are a perfect solution for anchoring concrete and masonry. |
Blow it clean using compressed air. (Overhead installations need not be blown clean.) Alternatively, drill the hole deep enough to accommodate embedment depth and the dust from drilling and tapping. Tighten the anchor into the base material until the hex-washer head contacts the fixture.
|
|
Back to Simpson Main Product Listing Product images and data courtesy of Simpson Strong-Tie Co, Inc® |
Be the first to get news
on new products, specials, and more!