Decking & Framing

6 Lobe Star drive recess, similar to Torx® Self-countersinking bugle head in medium & soft density wood Type 17 notched point for fast penetration Threaded approximately 2/3 of shank on most sizes Deep coarse threads for better hold Approved for use in all pressure treated lumber Always specify Type 316 Stainless Steel for Salt Water applications New package sizes, same screws Important Installation Instructions: If the screws are to be driven by a screw gun, be sure the bit is securely seated in the star recess of the screw. Start slowly and gradually increase speed until the head is driven flush. A high driving speed increases the chance of stripping the drive recess. If the tool has an adjustable torque collar, use a piece of scrap lumber to determine the proper setting needed to drive the head flush with the surface. This will prevent the screw head from twisting off.

Read more less

Star Drive - Type 316 Stainless Steel Experience the revolutionary 4 corner thread with raised ridge point for fast penetration, reduced drive torque and outstanding holding power. Self Countersinking Flat Head with Nibs Install using 35% less torque! For Decking, Docks and Boardwalks; Finishing, Millwork & Trim Star Drive 6 Lobe Type 316 Stainless Steel for the ultimate in corrosion resistance Approved for use in ACQ treated lumber

Read more less

Type 305 Stainless Steel - Wood Screws Type 17 notched point for fast penetration Self-countersinking bugle head Square drive recess reduces driver cam-out Threaded approximately 2/3 of shank on most sizes Deep coarse threads for better hold           Important Installation Instructions: If the screws are to be driven by a screw gun, be sure the bit is securely seated in the square recess of the screw. Start slowly and gradually increase speed until the head is driven flush. A high driving speed increases the chance of stripping the square drive recess. If the tool has an adjustable torque collar, use a piece of scrap lumber to determine the proper setting needed to drive the head flush with the surface. This will prevent twisting off the screw head.

Read more less

Made in the USA with Type 316 (low Carbon) Stainless Steel 316 stainless provides the highest salt water corrosion resistance of the 316 types. Appropriate for marine and seaside applications and in other severe conditions where corrosion is a concern  Must be installed with specified stainless steel fasteners Patented double shear nailing distributes the load through 2 points on each joist for greater strength. The nails slant through the joist into the header, not only fastening the hanger but also helping to carry some of the load. The hanger design allows for the use of fewer fasteners for faster installation Install with specified stainless steel fasteners Full length 3” or 3-1/2” hand drive nails (or 2-1/2” collated connector nails) are always required for the patented double sheer (angled) nailing. Under some conditions alternative sized fasteners may be substituted but at a potentially significant load reduction. See nail substitution chart. LUS series hangers are not intended for welded applications Caution! - Do not bend or remove tabs or alter hanger in any way

Read more less

Type 316 Stainless Steel Annular Thread, flat head Made of type 316 stainless steel for the ultimate corrosion resistance For installation of stainless steel joist hangers & framing connectors Made in USA AISI Grade 316 Stainless Steel has lower carbon content than 305 or 302HQ and contains molybdenum for superior corrosion resistance in salt water and other highly corrosive environments. It is the grade of stainless steel to be specified in any seaside application.

Read more less

Ipe Clip® Extreme Hidden Deck Fasteners by DeckWise® Perfect for Composite, PVC and Hardwood Decking, not for use with Trex® Clips, Screws and Bits included. Ipe Clip® is up to 3x stronger than other deck fastening systems Fast & Easy installation even on 3/4" & thicker decking Clip dimensions are 1" x 1" and 1/8" thick Ipe Plugs included only in 175pc packs. Safer & blemish free deck surface No dangerous nail or screw pops! Automatic gap spacing Limited Lifetime Warranty Use the Coverage Calculator to find out how many you need

Read more less

Type 305 Stainless Steel - Star Drive For fast and easy installation in high-exposure environments. DWP screws are built to last. Revolutionary 4 corner thread with raised ridge point for fast penetration and outstanding holding power Self Countersinking Flat Head with Nibs Installs with 35% less torque! For Decking, Docks and Boardwalks; Finishing, Millwork & Trim Star Drive 6 Lobe Type 305 Stainless Steel Approved for use in ACQ treated lumber

Read more less

Stainless Steel Screws with Color Coated Heads For Hardwood, Cedar, Redwood and Pressure Treated Decking Headcote screws are designed to work with Smart-Bit® Predrilling and Countersinking Tools, for a perfect finish.

Read more less

*Packs include 375 plugs only, no tool. PRO PLUG® for Trex® is a superior plugging system for Trex® decking & trim combining screw down strength with the beauty of a hidden fastener system Install in 2 easy steps 1. Set the Pro Plug screw with the PRO PLUG PVC Tool 2. Tap the Trex® plug in with a hammer. Plugs are cut from the original Trex deck boards for a perfect match Must use the Pro Plug screws for proper installation Customize your own Pro Plug® System for Trex® Decking Kit. The plug packs contain 375 plugs for 100 sq ft. Add your screws (375 piece packs) from the choices above or order just the plugs! Be sure to add on the PVC Tool above, it is needed for installation

Read more less

Packs are 100 lin ft (40 sq ft) and include everything you need, the plugs, screws and Pro Plug Tool. PRO PLUG® for Trex® is a superior plugging system for Trex® decking & trim combining screw down strength with the beauty of a hidden fastener system Install in 2 easy steps...Set the screw with the PRO PLUG PVC Tool and tap in the Trex® plug with a hammer. Plugs are cut from actual Trex® board for a perfect match Kits available in Stainless Steel or Epoxy Coated Carbon Steel The PRO PLUG PVC Tool drives fasteners to the correct depth every time. Its No Cam-Out Auto Stop™ prevents screw recess from stripping This 100 lin. ft. kit (40 sq feet) includes: (150) 2-3/4" Epoxy Coated Carbon Steel Screws with a T20 star recess (165) Trex® Plugs cut from the original Trex® material for a perfect match (1) Pro Plug Tool for PVC Trex Enhance kits include 1 scalloped profile template

Read more less

Ipe Clip® ExtremeKD®Hidden Deck Fasteners by DeckWise® Perfect for Composite, PVC and Kiln Dried Hardwood Decking, not for use with Trex® Allows for expansion of width of kiln dried hardwoods Clips, Spacers, Screws and Bits included. Ipe Clip® is up to 3x stronger than other deck fastening systems Fast & Easy installation even on 3/4" & thicker decking Ipe Plugs included only in 175pc packs. Safer & blemish-free deck surfaceNo dangerous nail or screw pops! Automatic gap spacing Ipe Clip Installation Guide Limited Lifetime Warranty 🖩 Calculate how many clips you need for your deck here.

Read more less

Packs are 100 lin ft (40 sq ft) and include everything you need, the plugs, screws and Pro Plug Tool. PRO PLUG® for Trex® is a superior plugging system for Trex® decking & trim combining screw down strength with the beauty of a hidden fastener system Install in 2 easy steps...Set the screw with the PRO PLUG PVC Tool and tap in the Trex® plug with a hammer. Plugs are cut from actual Trex® board for a perfect match Kits available in Stainless Steel or Epoxy Coated Carbon Steel The PRO PLUG PVC Tool drives fasteners to the correct depth every time. Its No Cam-Out Auto Stop™ prevents screw recess from stripping This 100 lin. ft. kit (40 sq feet) includes: (150) 2-3/4" Epoxy Coated Carbon Steel Screws with a T20 star recess (165) Trex® Plugs cut from the original Trex® material for a perfect match (1) Pro Plug Tool for PVC Trex Enhance kits include 1 scalloped profile template

Read more less

*Packs are 100 lin ft (40 sq ft) and include everything you need, the plugs, screws and Pro Plug Tool. PRO PLUG® for Azek® is a superior plugging system for Azek® / Timbertech decking & trim combining screw down strength with the beauty of a hidden fastener system ✔ Install in 2 easy steps...Set the screw with the PRO PLUG PVC Tool and tap in the Azek® plug with a hammer. ✔ Plugs are cut from actual Azek® / Timbertech board for a perfect match ✔ The PRO PLUG PVC Tool drives fasteners to the correct depth every time. Its No Cam-Out Auto Stop™ prevents screw recess from stripping 100 lin. ft. kit (40 sq feet) includes: ✔ (150) 2-3/4" Epoxy Coated Carbon Steel Screws with a T20 star recess ✔ (165) Azek® Plugs cut from the original Azek® material for a perfect match ✔ (1) Pro Plug Tool for PVC

Read more less

Made in the USA with Type 316 (low Carbon) Stainless Steel 316 stainless provides the highest salt water corrosion resistance of the 316 types. Appropriate for marine and seaside applications and in other severe conditions where corrosion is a concern  Must be installed with specified stainless steel fasteners Patented double shear nailing distributes the load through 2 points on each joist for greater strength. The nails slant through the joist into the header, not only fastening the hanger but also helping to carry some of the load. The hanger design allows for the use of fewer fasteners for faster installation Install with specified stainless steel fasteners Full length 3” or 3-1/2” hand drive nails (or 2-1/2” collated connector nails) are always required for the patented double sheer (angled) nailing. Under some conditions alternative sized fasteners may be substituted but at a potentially significant load reduction. See nail substitution chart. LUS series hangers are not intended for welded applications Caution! - Do not bend or remove tabs or alter hanger in any way

Read more less

316 Stainless Steel - Wood Screws Salt Water Safe Type 17 notched point for fast penetration Self-countersinking bugle head Square drive recess reduces driver cam-out Threaded approximately 2/3 of shank on most sizes Deep coarse threads for better hold Use with cedar, redwood, engineered wood and preservative treated *Type 316 Stainless Steel should always be specified for salt water applications. 316 grade stainless steel has a lower carbon content than 18-8 type stainless (302HQ, 304 and 305) and contains molybdenum for superior corrosion resistance in salt water and other highly corrosive environments. It is the grade of stainless steel to be specified in any seaside application to prevent rusting & bleeding through. Important Installation Instructions: If the screws are to be driven by a screw gun, be sure the bit is securely seated in the square recess of the screw. Start slowly and gradually increase speed until the head is driven flush. A high driving speed increases the chance of stripping the square drive recess. If the tool has an adjustable torque collar, use a piece of scrap lumber to determine the proper setting needed to drive the head flush with the surface. This will prevent twisting off the screw head.

Read more less

Stainless Steel Screws with Color Coated Heads For Hardwood, Cedar, Redwood and Pressure Treated Decking Headcote screws are designed to work with Smart-Bit® Predrilling and Countersinking Tools, for a perfect finish. Not sure what color you need? Use the interactive Deck Matcher

Read more less

The TC-G is the perfect hidden deck clip created to be used with 5/4" grooved deck boards. You may also use the TC-G with TC-G slot cutter on non grooved deck boards. See product demo video below! Spacer tabs on the clip automatically gap the decking 3/16" The easy-to-install clips are made of 304 Stainless Steel with a black oxide coating. Minimizes cupping & splitting of deck boards 25-year warranty by the manufacturer Covers 50 sq ft of decking Use in Trex®, Wolf™ PVC, Ipe, Teak, Cambara, Meranti, Fiberon Horizon®, ChoiceDek, MoistureShield™, Veranda® Decking, and more! More brands listed in Product Details link Below. Not designed for AZEK®, Timbertech® and Rhino Deck®TC-G 90 pc Kit Contents: (90) Clips (92) 1-5/8" stainless steel screws (1) #1 square drive bit Installation Instructions: TCG Full Product Details: TC-G

Read more less

Ipe Clip® Extreme S® Hidden Deck Fasteners by DeckWise® Perfect for Composite, PVC and Hardwood Decking, not for use with Trex® Formerly Ipe Clip Extreme 4- new clip design, same spacing Clips, Spacers, Screws and Bits included. Ipe Clip® is up to 3x stronger than other deck fastening systems Fast & Easy installation even on 3/4" & thicker decking Clip dimensions are 1" x 1" and 1/8" thick Ipe Plugs included only in 175pc packs. Safer & blemish free deck surface No dangerous nail or screw pops! Automatic gap spacing Limited Lifetime Warranty

Read more less

Star Drive - Type 316 Stainless Steel Trim Head T15 star drive - 6 lobe 4 corner thread with raised ridge point Fast penetration & superior holding power Installs using 35% less torque! Type 316 stainless steel for the ultimate in corrosion resistance Salt Water Safe Approved for use in treated lumber

Read more less

Stainless Steel Screws with Color Coated Heads For Hardwood, Cedar, Redwood and Pressure Treated Decking Headcote screws are designed to work with Smart-Bit® Predrilling and Countersinking Tools, for a perfect finish. Not sure what color you need? Use the interactive Deck Matcher

Read more less

Packs are 100 sq ft and include everything you need, the plugs, screws and Pro Plug Tool. PRO PLUG® for Trex® is a superior plugging system for Trex® decking & trim combining screw down strength with the beauty of a hidden fastener system Install in 2 easy steps...Set the screw with the PRO PLUG PVC Tool and tap in the Trex® plug with a hammer. Plugs are cut from actual Trex® board for a perfect match Kits available in Stainless Steel or Epoxy Coated Carbon Steel The PRO PLUG PVC Tool drives fasteners to the correct depth every time. Its No Cam-Out Auto Stop™ prevents screw recess from stripping This 100 sq. ft. kit includes: (350) 2-3/4" Epoxy Coated Carbon Steel Screws with a T20 star recess (375) Trex® Plugs cut from the original Trex® material for a perfect match (1) Pro Plug Tool for PVC Trex Enhance kits include 1 scalloped profile template

Read more less

Made in the USA with Type 316 (low Carbon) Stainless Steel 316 stainless provides the highest salt water corrosion resistance of the 316 types. Appropriate for marine and seaside applications and in other severe conditions where corrosion is a concern  Must be installed with specified stainless steel fasteners Patented double shear nailing distributes the load through 2 points on each joist for greater strength. The nails slant through the joist into the header, not only fastening the hanger but also helping to carry some of the load. The hanger design allows for the use of fewer fasteners for faster installation Install with specified stainless steel fasteners Full length 3” or 3-1/2” hand drive nails (or 2-1/2” collated connector nails) are always required for the patented double sheer (angled) nailing. Under some conditions alternative sized fasteners may be substituted but at a potentially significant load reduction. See nail substitution chart. LUS series hangers are not intended for welded applications Caution! - Do not bend or remove tabs or alter hanger in any way

Read more less