Star Drive
-
Flat Head Deck-Drive™ DWP Wood Screws, 305 Stainless Steel
Type 305 Stainless Steel - Star Drive For fast and easy installation in high-exposure environments. DWP screws are built to last. Revolutionary 4 corner thread with raised ridge point for fast penetration and outstanding holding power Self Countersinking Flat Head with Nibs Installs with 35% less torque! For Decking, Docks and Boardwalks; Finishing, Millwork & Trim Star Drive 6 Lobe Type 305 Stainless Steel Approved for use in ACQ treated lumber
$43.00 - $581.95
-
Flat Head Deck-Drive™ DWP Wood Screws, 316 Stainless Steel
Star Drive - Type 316 Stainless Steel Experience the revolutionary 4 corner thread with raised ridge point for fast penetration, reduced drive torque and outstanding holding power. Self Countersinking Flat Head with Nibs Install using 35% less torque! For Decking, Docks and Boardwalks; Finishing, Millwork & Trim Star Drive 6 Lobe Type 316 Stainless Steel for the ultimate in corrosion resistance Approved for use in ACQ treated lumber
$60.75 - $680.15
-
Bugle Head Screws, Star Drive, Stainless Steel
6 Lobe Star drive recess, similar to Torx® Self-countersinking bugle head in medium & soft density wood Type 17 notched point for fast penetration Threaded approximately 2/3 of shank on most sizes Deep coarse threads for better hold Approved for use in all pressure treated lumber Always specify Type 316 Stainless Steel for Salt Water applications New package sizes, same screws Important Installation Instructions: If the screws are to be driven by a screw gun, be sure the bit is securely seated in the star recess of the screw. Start slowly and gradually increase speed until the head is driven flush. A high driving speed increases the chance of stripping the drive recess. If the tool has an adjustable torque collar, use a piece of scrap lumber to determine the proper setting needed to drive the head flush with the surface. This will prevent the screw head from twisting off.
$95.95 - $482.00
-
Deck-Drive™ DWP Trim Screw, 316 Stainless Steel
Star Drive - Type 316 Stainless Steel Trim Head T15 star drive - 6 lobe 4 corner thread with raised ridge point Fast penetration & superior holding power Installs using 35% less torque! Type 316 stainless steel for the ultimate in corrosion resistance Salt Water Safe Approved for use in treated lumber
$57.15 - $480.85
-
Trim Head Deck-Drive™ DWP Wood Screw, 305 Stainless Steel
Trim Head, T15 star drive Box thread reduces required driving torque by 35% Perfect for decks, finishing, millwork and trim Sharp point specially designed to easily penetrate hardwoods
$40.52 - $392.25
-
Trim Screws, Star Drive, Stainless Steel
305 & 316 Star Drive Type 17 point for fast penetration Self-countersinking trim head Dry lubricated with non-stick film Threaded approximately 2/3 of shank Available in AISI type 305 and 316 stainless steel
$96.35 - $543.95
-
U2 Fasteners Universal Screw, 316 Stainless Steel
The Universal Screw™ is great for use in deck construction. Tapper Point, consisting of the Cork Screw Start and Blade Cutting Thread allows the screw to pierce materials easily. Screws feature a Star Recess system that holds the U2 bits securely in place. This allows the screw to be installed one-handed. The universal screw includes nibs that help the screw to countersink into the toughest of materials. Below the smooth shank is the Reamer Thread*, which enlarges the hole to create a passage when drawing materials together and reduces tension for the screw head. #10 x 3-1/8" screws are Case Hardened Carbon Steel, the rest are 316 Stainless Steel *Reamer Thread is only present on screws 2" and longer
$134.05 - $1,046.75
-
U2 Fasteners Fine Screw, 316 Stainless Steel
The Fine Screw™ is U2's trim screw design This screw has a specially designed star drive that holds U2 bits so tightly that the screws can be installed one-handed.
$134.05
-
Headcote Trim Head #8 x 2-1/2" Screws, 1050pc Box
Stainless Steel Screws with Color Coated Heads For Hardwood, Cedar, Redwood and Pressure Treated Decking Headcote screws are designed to work with Smart-Bit® Predrilling and Countersinking Tools, for a perfect finish. Not sure what color you need? Use the interactive Deck Matcher
$358.00
-
Headcote Trim Head #8 x 2-1/2" Screws, 350pc Box, 305SS
Stainless Steel Screws with Color Coated Heads For Hardwood, Cedar, Redwood and Pressure Treated Decking Headcote screws are designed to work with Smart-Bit® Predrilling and Countersinking Tools, for a perfect finish. Not sure what color you need? Use the interactive Deck Matcher
$129.75
-
Cap-Tor xd Composite Deck Screws, #10 x 2-1/2", 1750pc Box, 316 Stainless Steel
For Composite & Capstock Decking Type 316 Stainless Steel for the Ultimate in corrosion resistance Salt Water Safe Extra deep T-20 star recess to minimize "wobble" at screw starting Undercut head design - a specially engineered head that cleanly penetrates the hard outer coating of capstock products Transverse™ Threading eliminates "mushroom" effect common to composite decking installed using standard deck screws. Auger Point for faster, easier entry. Helps prevent splitting Available in 10 colors to blend with a wide range of composite deck board colors Use the Deck Matcher to find the best color. For a uniform look, install using the Smart-Bit Depth Setter
$846.50
-
Cap-Tor xd Composite Deck Screws, #10 x 2-1/2", 1050pc Box, 316 Stainless Steel
For Composite & Capstock Decking Type 316 Stainless Steel for the Ultimate in corrosion resistance Salt Water Safe Extra deep T-20 star recess to minimize "wobble" at screw starting Undercut head design - a specially engineered head that cleanly penetrates the hard outer coating of capstock products Transverse™ Threading eliminates "mushroom" effect common to composite decking installed using standard deck screws. Auger Point for faster, easier entry. Helps prevent splitting Available in 10 colors to blend with a wide range of composite deck board colors Use the Deck Matcher to find the best color. For a uniform look, install using the Smart-Bit Depth Setter
$526.50
-
Cap-Tor xd Composite Deck Screws, #10 x 2-1/2", 350pc Box, 316 Stainless Steel
For Composite & Capstock Decking Type 316 Stainless Steel for the Ultimate in corrosion resistance Salt Water Safe Extra deep T-20 star recess to minimize "wobble" at screw starting Undercut head design - a specially engineered head that cleanly penetrates the hard outer coating of capstock products Transverse™ Threading eliminates "mushroom" effect common to composite decking installed using standard deck screws. Auger Point for faster, easier entry. Helps prevent splitting Available in 10 colors to blend with a wide range of composite deck board colors Use the Deck Matcher to find the best color. For a uniform look, install using the Smart-Bit Depth Setter
$186.15
-
Cap-Tor xd Composite Deck Screws, #10 x 2-1/2", 1750pc Box, 305 Stainless Steel
For Composite & Capstock Decking CAP-TOR xd is designed for use with Trex, Timber-Tech, Fiberon, Azek and other composites & capstocks Type 305 Stainless Steel for superior corrosion resistance Extra deep T-20 star recess to minimize "wobble" at screw starting Undercut head design - a specially engineered head that cleanly penetrates the hard outer coating of capstock products Transverse™ Threading eliminates "mushroom" effect common to composite decking installed using standard deck screws. Auger Point for faster, easier entry. Helps prevent splitting Available in 15 colors to blend with a wide range of composite deck board colors Use the Deck Matcher to find the best color. For a uniform finish install using the Smart-Bit Depth Setter
$678.15
-
Cap-Tor xd Composite Deck Screws, #10 x 2-1/2", 1050pc Box, 305 Stainless Steel
For Composite & Capstock Decking CAP-TOR xd is designed for use with Trex, Timber-Tech, Fiberon, Azek and other composites & capstocks Type 305 Stainless Steel for superior corrosion resistance Extra deep T-20 star recess to minimize "wobble" at screw starting Undercut head design - a specially engineered head that cleanly penetrates the hard outer coating of capstock products Transverse™ Threading eliminates "mushroom" effect common to composite decking installed using standard deck screws. Auger Point for faster, easier entry. Helps prevent splitting Available in 15 colors to blend with a wide range of composite deck board colors Use the Deck Matcher to find the best color. For a uniform finish install using the Smart-Bit Depth Setter
$421.00
-
Cap-Tor xd Composite Deck Screws, #10 x 2-1/2", 350pc Box, 305 Stainless Steel
For Composite & Capstock Decking CAP-TOR xd is designed for use with Trex, Timber-Tech, Fiberon, Azek and other composites & capstocks Type 305 Stainless Steel for superior corrosion resistance Extra deep T-20 star recess to minimize "wobble" at screw starting Undercut head design - a specially engineered head that cleanly penetrates the hard outer coating of capstock products Transverse™ Threading eliminates "mushroom" effect common to composite decking installed using standard deck screws. Auger Point for faster, easier entry. Helps prevent splitting Available in 15 colors to blend with a wide range of composite deck board colors Use the Deck Matcher to find the best color. For a uniform finish install using the Smart-Bit Depth Setter
$148.15
-
Headcote Trim Head #8 x 2-1/2" Screws, 2500pc Box
Stainless Steel Screws with Color Coated Heads For Hardwood, Cedar, Redwood and Pressure Treated Decking Headcote screws are designed to work with Smart-Bit® Predrilling and Countersinking Tools, for a perfect finish. Not sure what color you need? Use the interactive Deck Matcher
$798.40
-
Headcote Trim Head #8 x 2-1/2" Screws, 1750pc Box
Stainless Steel Screws with Color Coated Heads For Hardwood, Cedar, Redwood and Pressure Treated Decking Headcote screws are designed to work with Smart-Bit® Predrilling and Countersinking Tools, for a perfect finish. Not sure what color you need? Use the interactive Deck Matcher
$576.25
-
Headcote Trim Head #7 x 2-1/4" Screws, 3000pc Box, 305SS
Stainless Steel Screws with Color Coated Heads For Hardwood, Cedar, Redwood and Pressure Treated Decking Headcote screws are designed to work with Smart-Bit® Predrilling and Countersinking Tools, for a perfect finish. Not sure what color you need? Use the interactive Deck Matcher
$747.65
-
Headcote Trim Head #7 x 1-5/8" Screws, 5000pc Box
Stainless Steel Screws with Color Coated Heads For Hardwood, Cedar, Redwood and Pressure Treated Decking Headcote screws are designed to work with Smart-Bit® Predrilling and Countersinking Tools, for a perfect finish.
$961.85
-
Headcote Trim Head #7 x 2-1/4" Screws, 350pc Box, 305SS
Stainless Steel Screws with Color Coated Heads For Hardwood, Cedar, Redwood and Pressure Treated Decking Headcote screws are designed to work with Smart-Bit® Predrilling and Countersinking Tools, for a perfect finish. Not sure what color you need? Use the interactive Deck Matcher
$111.00
-
Headcote Trim Head #7 x 1-5/8" Screws, 1050pc Box
Stainless Steel Screws with Color Coated Heads For Hardwood, Cedar, Redwood and Pressure Treated Decking Headcote screws are designed to work with Smart-Bit® Predrilling and Countersinking Tools, for a perfect finish.
$249.15
-
Headcote Trim Head #7 x 1-5/8" Screws, 350pc Box, 305SS
Stainless Steel Screws with Color Coated Heads For Hardwood, Cedar, Redwood and Pressure Treated Decking Headcote screws are designed to work with Smart-Bit® Predrilling and Countersinking Tools, for a perfect finish.
$89.35
-
Self-Drill Finishing Screws, 410SS
For Attaching Wood Siding, Wood Panels and Metal Trim to Steel Studs Screws have a trim head, #3 drill point and T-15 star drive. Triple strength corrosion resistance: 410 stainless steel + Xylan coating + Bright hardening Also perfect for use with stainless steel, aluminum and steel deck framing systems Drill point with auger tip for self tapping
$70.15 - $220.05
-
U2 Fasteners Universal Screw, Carbon Steel
The Universal Screw™ is great for use in deck construction. Tapper Point, consisting of the Cork Screw Start and Blade Cutting Thread allows the screw to pierce materials easily. Screws feature a Star Recess system that holds the U2 bits securely in place. This allows the screw to be installed one-handed. The universal screw includes nibs that help the screw to countersink into the toughest of materials. Below the smooth shank is the Reamer Thread*, which enlarges the hole to create a passage when drawing materials together and reduces tension for the screw head. Screws are Case Hardened Carbon Steel, also available in 316SS *Reamer Thread is only present on screws 2" and longer
$28.25 - $62.10
-
U2 Fasteners Universal Screw, #10 x 2-1/2", Black, 350pc
The Universal Screw™ is great for use in deck construction. Tapper Point, consisting of the Cork Screw Start and Blade Cutting Thread allows the screw to pierce materials easily. Screws feature a Star Recess system that holds the U2 bits securely in place. This allows the screw to be installed one-handed. The universal screw includes nibs that help the screw to countersink into the toughest of materials. Below the smooth shank is the Reamer Thread, which enlarges the hole to create a passage when drawing materials together and reduces tension for the screw head. Screws are also available in Case Hardened Carbon Steel and 316 Stainless Steel
$61.00
